PULS

Redundancy unit

DIMENSION series

Y-series

Dual-input redundancy module (2 x inputs + 1 x output)

built-in decoupl. MOSFET (for 1+1 or N+1 redundancy)
ATEX approval

8.4Vdc-36.4Vdc (12Vdc / 24Vdc nom.)

80A (at 28Vdc)

12-28Vdc (12Vdc / 24Vdc nom.)

screw-clamp connections

short-circuit protection (130A threshold at 6V)
Series / parallel operation -- 1+1 Redundancy Use of 2 identical power supplies in parallel to provide continued operation following most failures in a single power supply. The 2 power supply outputs should be isolated from each other by utilizing diodes or other switching arrangements. N+1 Redundancy Use of 3 or more identical power supplies in parallel to provide continued operation following most failures in a single power supply. All power supply outputs should be isolated from each other by utilizing diodes or other switching arrangements.

46 mm

DIN rail mounting

W46mm x H124mm x D127mm

-40...+70 °C

1500A peak max. inrush (at 8.4-36.4Vdc input)

Suitable for all Power Supplies

(8.4-36.4Vdc input; 2x20A input) 2.7 W
(8.4-36.4Vdc input; 40A input) 3.6 W

Commercialized

YR80241

(output stage) 320 μF

CE marking
UL 508
UL 60950-1
IEC 60950-1 CB-Scheme
IECEx
ATEX
Class I Div. 2 HazLoc
GL Marine
ABS Marine
EAC Registration
EN 61000-6-1 Immunity for residential environments
EN 61000-6-2 Immunity for industrial environments
EN 61000-6-3 Emission for residential environments

For N+1 and 1+1 redundant systems
Dual input with single output
Suitable for all Power Supplies
Only 50mV Voltage Drop at 40A Output Current
Only 2.7W Loss at 40A and 8.3W at 80A Output Current
160% (130A) Peak Load Capability
Reverse input polarity protection
Full power between -40°C and +70°C
Width only 46mm
Rugged metal housing
Easy wiring;
Distribution terminal for negative pole included
3 Year warranty
The YR80.241 is a redundancy module which can be used to build 1+1 and N+1 redundant systems. It is equipped with 2 input channels which can be connected to power supplies with up to 40A output current and 1 output which can carry nominal currents up to 80A. The module is suitable for power supplies with constant current overload behaviour as well as any kind of Hiccup overload behaviour. In addition to the YR80.241 the YR80.242 is also available which is cost-optimized and suitable for all DIMENSION power supplies except the QT40 series. The novelty of this redundancy module is the utilization of mosfets instead of diodes for the decoupling of the 2 input channels. This reduces the heat generation and the voltage drop between input and output. The redundancy module does not require an additional auxiliary voltage and is self-sufficient even in case of a short circuit across the output. Due to the low power losses the unit is very slender and only requires 46mm width on the DIN-rail. Large connection terminals allow for a safe and fast installation with a large international approval package. This unit is suitable for nearly every application.

(at 40°C; 40A output; 2x20A input) 513000 hours
(at 40°C; 40A output; 2x40A input) 143000 hours
(at 25°C; 80A output; 2x20A input) 1450000 hours
(at 25°C; 80A output; 2x40A input) 405000 hours

49mVpp (20Hz...20MHz; 50Ω)

2673000h (at 40°C; 2x20A input; MTBF SN 29500 IEC 61709)
2088000h (at 40°C; 2x40A input; MTBF SN 29500 IEC 61709)
4544000h (at 25°C; 2x20A input; MTBF SN 29500 IEC 61709)
3669000h (at 25°C; 2x40A input; MTBF SN 29500 IEC 61709)
100000h (at 40°C; 2x20A input; MTBF MIL HDBK 217F GB40)
89000h (at 40°C; 2x40A input; MTBF MIL HDBK 217F GB40)
133000h (at 25°C; 2x20A input; MTBF MIL HDBK 217F GB25)
117000h (at 25°C; 2x40A input; MTBF MIL HDBK 217F GB25)
536000h (at 40°C; 2x20A input; MTBF MIL HDBK 217F GF40)
478000h (at 40°C; 2x40A input; MTBF MIL HDBK 217F GF40)
707000h (at 25°C; 2x20A input; MTBF MIL HDBK 217F GF25)
628000h (at 25°C; 2x40A input; MTBF MIL HDBK 217F GF25)